As an AllTrails member, you can create your own custom maps using either a desktop or laptop computer with our free map creation tool.
We completely rebuilt the routing engine that powers this tool to make it easier than ever to choose the right path based on your activity, helping you spend less time planning and more time out on the trail.
To create a new map:
- Go to https://www.alltrails.com/explore/map/new or hover over 'Saved' in the top header and select 'Create Map'
- To centre your map around a particular area, you can pan and zoom to your desired area, or click 'Draw route' which will allow you to search by street address, park or location name, or lat/long. You can also upload a GPX file, and the map will be centered around the uploaded file.
- Under 'Description' you can add a name for your map, add an optional description, and control the privacy of the map
Once saved, your custom maps will be listed under 'Saved' >> 'My maps' in the AllTrails header. These maps automatically sync with your AllTrails iPhone or Android app, and you can access your maps in the app under 'Saved' >> 'My maps'.
NOTE: Occasionally you will need to force a sync between the mobile apps and our servers. To do this, navigate to your 'My maps' section as outlined above, then swipe down on the screen to refresh.
Smart Routing vs. Drawing Mode:
Once you've clicked on 'Draw route', our new and improved map creation tool includes two options that you will see in the upper left corner of the screen. Smart Routing will be activated by default, but you can toggle the bar off to switch to Drawing mode.
Smart Routing is the simplest way to create a route from Point A to Point B. Select your activity in the drop-down in the upper left corner of the screen, click on a starting point, click on where you want to go, and we will intelligently and automatically route you on the best path for your activity.
The following activities are available for routing:
- Hiking - when this is selected, the routing preference will be hiking trails and walking paths that support pedestrian access; you should not be routed anywhere where pedestrians are not allowed
- Mountain Biking - when this is selected, the routing preference will be multi-surface trails that support bicycle access; you should not be routed on any trails, walking paths, or roads where bikes are not allowed
- Bike Touring - when this is selected, the routing preference will be on trails, roads, and paths that support bicycle access with a preference for good surfaces and less hilly routes; you should not be routed on any trails, walking paths, or roads where bikes are not allowed
- Road Biking - when this is selected, the routing preference will be on paved roads and paths that support bicycle access; you should not be routed on any trails, walking paths, or roads where bikes are not allowed
- OHV/Off-road Driving - when this is selected, the routing preference will be on multi-surface roads and trails that support motorised "adventure" riding; you should not be routed on any trails or walking paths where motorised vehicles are not allowed
- Scenic Driving - when this is selected, the routing preference will be on paved roads
Note: When routing for mountain biking, bike touring, road biking, off-road driving, or scenic driving, if there is a one-way street, trail, or path, routing will always follow the direction of the pathway.
If you're trying to route on a specific segment and you're being re-rerouted, you can always disable Smart Routing to manually draw along that segment. The segment or road may not be recognised by the underlying OSM data that powers the routing engine, but you can always draw along the segment manually and then reactivate Smart Routing to finish the route.
Drawing Mode allows you to freely draw your route. Segments and roads will not automatically be selected or snapped-to when in this mode. Use your mouse cursor and left-click to draw the trail route.
Tip: When in 'Drawing Mode', you can hold 'Shift' on your keyboard to enable free-draw. In this state the trail line will be drawn wherever you move your cursor. To undo free-draw, let go of the 'Shift' key and left-click on your mouse to create a straight line to the next point.
Additional tips for routing and drawing:
- To create an out-and-back trail click on the 'Double-Back' button beneath the colour options to create a route that returns the way you came
- To complete a loop or return to the start of the trail using Smart Routing or Drawing Mode, click 'Close Circular'
- To reverse the locations of the green start and black end markers, click 'Reverse'
- To change the colour of a route, select a colour from the colour block options
- To switch between routing and drawing modes, you can use the control key on your keyboard
- If you make a mistake simply click the Undo arrow in the lower left corner of the screen
- You can click the Redo arrow to reapply your last action if you change your mind
Please note that you can only select one activity at a time for routing. You can switch your activity (for instance from mountain biking to hiking) but it will not update or re-route the existing drawn route. In order to start routing in your new activity you will need to click directly on the map after you've updated your activity.
- cmd-z / ctrl-z = undo
- cmd-y / ctrl-y / cmd-shift-z / ctrl-shift-z = redo
- ctrl = toggles between routing and drawing modes
- delete / backspace = deletes a selected route node
- shift = "free-draws" when clicking and dragging mouse in drawing mode, allows you to draw on top of lines and also allows you to draw on top of markers (without dragging them)
- option = keeps start/end marker separated, and also when dragging a start/end marker drags along the connecting line segment
Edit and save:
When finished, click 'Save.' You can create multiple routes on the same map using the various colour options. Just save your first route and then click 'Draw Route' again to add another.
To edit a saved route, click the overflow menu (three dots) next to the route in the left column and select 'Edit'.
To delete a route, click the overflow menu (three dots) next to the route in the left column and select 'Delete'.
- To edit points in your route you can simply drag them to another area or hit the 'delete' button to remove a point.
For additional information on editing maps, including tutorials, click here.
Create a title and description for your waypoints in the edit column. Position your waypoint along the route by clicking on the waypoint and dragging its corresponding purple dot to the new desired location. To always show the title of the waypoint on the map view, click the 'Show Title' box in the edit column. You can find additional information on adding waypoints here.
You have the option to provide a brief description of your map to easily remember what the route covers and why you created it. This may be useful to people who you share the map with.
Once you have saved a route, upload photos directly from your computer by clicking the arrow to expand the 'Photos' section, then clicking 'Add new photos'. You can click 'browse' to search your files or drag photos into the box provided.
Drag your mouse along the elevation profile graph at the bottom of the map screen for each of your routes to see the corresponding point on the map.
You can share your custom map via the AllTrails iPhone and Android apps or simply by copying the URL of the map at the top of your browser and pasting it wherever you’d like to share it. For more information on sharing maps, click here.